Device library

thaTEC:OS – Device library

Your device is missing? Fill out our device feature request form and
>> Send us a request for your device! <<

Filter by manufacturerASIAgilentKeysightAmetekAnaPicoAnritsuBerkeley NucleonicsBrukerCoboltCoherentCryoVacEurothermFAST ComTecFLIRGMWGWInstekGroup3HamamatsuKeithleyTektronixKepcoKikusuiKymeraLakeShoreMadCityLabsMarzhauserMeasurement computingNational InstrumentsNewportOcean OpticsPCOPhysikinstrumente (PI)PicotechRedLabRohde & SchwarzSmarActSpinCoreStanford Research Systems (SRS)SurugaSwabian InstrumentsTableStableTeledyne LeCroyThorlabsTopticaVelmex Clear filter
Filter by device typeCameraDAQ hardwareDelay lineDetectorGaussmeterLaserLock-in amplifierMultimeterOscilloscopePositioning systemPower supplyPowermeterPulse generatorRF sourceRotation stageSignal analyzerSourcemeterSpectrometerTemperature controllerTimeresolutionVector Network Analyzer (VNA) Clear filter

Manufacturer	Device name	Device type
ASI	MS2000	Positioning system
Name of module in thaTEC:Core: ASI-MS2000 The current version of this module allows for the control of the following functions: Up to 3 axes Enable/disable single axis Home axes Read current position Move absolute Set current position as zero Move relative to zero position (e.g. for identical 2D scans at multiple positions on the sample) Enable/disable waiting for stage to reach target position (e.g. for very fast automated measurements)
Agilent	33621A waveform generator	Pulse generator
Name of module in thaTEC:Core: Keysight_33621A
Agilent	81130 Pulse generator	Pulse generator
Name of module in thaTEC:Core: Keysight_81130A_PulseGen The current version of this module allows for the control of the following functions: Set frequency/period Set pulse width/delay per channel Set high/low voltage per channel
Agilent	DSO-X	Oscilloscope
Name of module in thaTEC:Core: Agilent_DSO-X_Oscilloscope The current version of this module allows for the control of the following functions: Activate channels Read out traces from activated channels Continuous readout
Agilent	E82XX-series RF source (E8241A, E8244A, E8251A, E8254A, E8247C, E8257C, E8267C, E8257D, E8267D)	RF source
Name of module in thaTEC:Core: Agilent_E8257D The current version of this module allows for the control of the following functions: Set RF frequency Set output power Switch RF output on/off Enable pulse modulation Set pulse width/delay/period/rate Dynamically set frequency via remote parameter
Agilent	N51XX-series RF source (N5181A, N5182A, N5183A, N5161A, N5162A, N5171B, N5172B, N5181B, N5182B, N5173B, N5183B)	RF source
Name of module in thaTEC:Core: Agilent_E8257D The current version of this module allows for the control of the following functions: Set RF frequency Set output power Switch RF output on/off Enable pulse modulation Set pulse width/delay/period/rate Dynamically set frequency via remote parameter
Agilent	N52XX series VNA (N5225A, N5221B, N5222B, N5224B, N5225B, N5227B, N5231B, N5232B, N5234B, N5235B, N5239B, N5230C, N5241B, N5242B, N5244B, N5245B, N5247B, N5249B)	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Keysight_N52xx_VNA The current version of this module allows for the control of the following functions: Read all S-Parameters (real and imaginary) Set center frequency by equation and device parameter from another device (e.g. Hall-probe) Set start/stop frequency Set number of points Set averages Set output power Switch output on/off Activate traces Take reference Display raw/corrected data (using reference data) Continuous readout Unleveled indicator
Agilent	N6700 series (N6776A)	Power supply
Name of module in thaTEC:Core: Agilent_N6776A The current version of this module allows for the control of the following functions: Set current Switch output Set software limits Set voltage protection level Current ramping: set stepsize and timing
Agilent	N9010A spectrum analyzer	Signal analyzer
Name of module in thaTEC:Core: Keysight_N9010A The current version of this module allows for the control of the following functions: Set center frequency Set frequency span Set measurement type Display traces Set trace type/trace name/detector type Set average mode and number Set number of sweep points Set input impedance Set amplitude units Set bandwidth Set attenuation and reference level
Ametek	7230	Lock-in amplifier
Name of module in thaTEC:Core: Ametek_7230_lock-in The current version of this module allows for the control of the following functions: Set all input parameters Set filter time constant and slope Set sensitivity Set gain Set display and data type Continuous readout on/off Set all reference channel parameters Set notch filter frequency
Ametek	7265 Dual Phase DSP Lock-in Amplifier	Lock-in amplifier
Name of module in thaTEC:Core: Ametek_7265_lock-in The current version of this module allows for the control of the following functions: Set contuous readout Set input mode (single-ended differential inverted current input) Readout Channel 1 and 2 with different readout-modes
AnaPico	APSIN series	RF source
Name of module in thaTEC:Core: BNC845 The current version of this module allows for the control of the following functions: Set RF frequency Set RF power Enable/Disable modulation Set modulation type/source Set pulse period/width/polarity Set amplitude modulation frequency/depth/waveform
Anritsu	68369A	RF source
Name of module in thaTEC:Core: Anritsu_68369 The current version of this module allows for the control of the following functions: Set frequency and output power Switch output Internal modulation settings External pulse modulation settings
Anritsu	MG3692C	RF source
Name of module in thaTEC:Core: Anritsu_MG369xC-series The current version of this module allows for the control of the following functions: Set RF frequency Set RF power Set trigger source/trigger type/trigger edge type/clock rate Enable pulse modulation Set pulse delay/width/period/frequency/polarity
Anritsu	MS2830A, MS2690A, MS2691A, MS2692A	Signal analyzer
Name of module in thaTEC:Core: Anritsu_MS269Xa_MS2830A_SpectrumAnalyzer The current version of this module allows for the control of the following functions: Set start/stop frequency Set number of points Ser averages Set storage mode (Average - Min hold - max hold - linear average) Take reference (selectable math operation for reference) Set resolution bandwidth filter Set video bandwidth filter
Anritsu	MS46XX-series VNA (MS4632A, MS4633A, MS4634A, MS4632A, MS4642A, MS4644A, MS4645A, MS4647A, MS4642B, MS4644B, MS4645B, MS4647B)	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Anritsu_MS46xx_VNA The current version of this module allows for the control of the following functions: Read all S-Parameters (real and imaginary) Set center frequency by equation and device parameter from another device (e.g. Hall-probe) Set start/stop frequency Set number of points Set averages Set output power Switch output on/off Activate traces Take reference Display raw/corrected data (using reference data) Continuous readout Unleveled indicator
Anritsu	MS46XXX-series, MS46122B, MS46131A, MS46322B,MS46522B,MS46524B	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Anritsu_ShockLine_MS46xxx_VNA Remarks: S12 The current version of this module allows for the control of the following functions: Set start/stop frequency Set number of points per spectrum Set averages Set output power and toggle output Select recorded traces (S11
Any	Universal camera module (NI Vision license required)	Camera
Name of module in thaTEC:Core: camera Remarks: NI Vision license required! The current version of this module allows for the control of the following functions: Calibrate Measure distances Zoom Export live image Set framerate Set gain Set exposure time
Berkeley Nucleonics	845	RF source
Name of module in thaTEC:Core: BNC845 The current version of this module allows for the control of the following functions: Set RF frequency Set RF power Enable/Disable modulation Set modulation type/source Set pulse period/width/polarity Set amplitude modulation frequency/depth/waveform
Berkeley Nucleonics	S1365	Signal analyzer
Name of module in thaTEC:Core: BNC_spectrumanalyzer
Bruker	Bruker power supply (several series)	Power supply
Name of module in thaTEC:Core: Bruker_power_supply The current version of this module allows for the control of the following functions: Set current Readout actual current Set software current limits Shift mode to shift current by a certain amount (e.g. for taking reference signals for VNA-FMR measurements)
Cobolt	05-01 series (Zouk, Twist, Calypso, Fandango, Samba, Jive, Bolero, Flamenco, Rumba)	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	04-01 series (Zouk, Twist, Calypso, Fandango, Samba, Jive, Bolero, Flamenco, Rumba)	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Coherent	Sapphire	Laser
Name of module in thaTEC:Core: Coherent_Sapphire
CryoVac	TIC 500 temperature controller	Temperature controller
Name of module in thaTEC:Core: CryoVac_TIC-500_Temperature-controller The current version of this module allows for the control of the following functions: Read all 4 sensor inputs Set setpoints of both heater outputs Edit PID settings Read analog inputs Set analog outputs
Eurotherm	ET-3500 series	Temperature controller
Name of module in thaTEC:Core: Eurotherm_3500-series Remarks: For initial setup, please refer to the changelog of the module. The current version of this module allows for the control of the following functions: Change setpoint Set maximum temperature rate Read-out current temperature Temperatur vs. time graph
FAST ComTec	MCS6A (USB version) time digitizer for time-resolved Brillouin light scattering with thaTEC:TFPDAS5	Timeresolution
Name of module in thaTEC:Core: MCS6A
FAST ComTec	P7887 (PCI version) time digitizer for time-resolved Brillouin light scattering with thaTEC:TFPDAS5	Timeresolution
Name of module in thaTEC:Core: P7887
FLIR	BlackFly (NI Vision license required), Chameleon (NI Vision license required), Flea (NI Vision license required)	Camera
Name of module in thaTEC:Core: camera
GMW	5972 magnet control	Power supply
Name of module in thaTEC:Core: GMW_Magnet-control-5972 The current version of this module allows for the control of the following functions: Read current output values (voltage and current) Read current field Read current temperature Set output mode (open or closed loop or hybrid mode) Set output current/target field with a given precision Create OLC Edit hardware settings and PID settings
GMW	MC-XYZT Motion control	Positioning system
Name of module in thaTEC:Core: GMW_Velmex_MotionControl The current version of this module allows for the control of the following functions: Read and set absolute position of all 4 axes Indicator if stage is homed Relative movement relative to defined position
GWInstek	GPD-x303S series	Power supply
Name of module in thaTEC:Core: GWInstek_GPD-X303S_series The current version of this module allows for the control of the following functions: Set output current and voltage
Group3	DTM series	Gaussmeter
Name of module in thaTEC:Core: Group3_DTM The current version of this module allows for the control of the following functions: Read field.Set units Set field ranges Autorange on/off Continuous readout on/off
Hamamatsu	ImagEM X2	Detector
Name of module in thaTEC:Core: Hamamatsu_Image_EM_X2 The current version of this module allows for the control of the following functions: Set gain Set exposure time Set readout speed Set readout direction Capture and display image Set crop area via cursors in the image Display device info (model/temperature)
Hamamatsu	ORCA series	Detector
Name of module in thaTEC:Core: Hamamatsu-ORCA The current version of this module allows for the control of the following functions: Set exposure time Set readout speed Set readout direction Capture and display image Set crop area via cursors in the image Display device info (model/temperature)
Keithley	2000	Multimeter
Name of module in thaTEC:Core: Keithley_2000
Keithley	2182A Nanovoltmeter	Multimeter
Name of module in thaTEC:Core: Keithley_2182A
Keithley	2200xx-series multi channel lab power supplies,2231A-30-3	Power supply
Name of module in thaTEC:Core: Keithley_22XX-series_power-supply The current version of this module allows for the control of the following functions: Set output value and switch output of all channels individually
Keithley	22xx series (2220, 2230, 2231)	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Keithley	2400 series	Sourcemeter
Name of module in thaTEC:Core: Keithley_2400
Keithley	2614B	Sourcemeter
Name of module in thaTEC:Core: Keithley_2614B The current version of this module allows for the control of the following functions: Enable/disable outputs Switch mode for each output Set current/voltage for each output Set current range/voltage limmit for each channel Set maximum/minimum current for each channel Read resistance for each output Plot resistance over time Export time-resistance plots
Keithley	6200 series (6221)	Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Keithley	DMM 6500	Multimeter
Name of module in thaTEC:Core: Keithley_DMM_6500_multimeter Remarks: current The current version of this module allows for the control of the following functions: Read and display voltage/current Plot values over time Set auto or manual range Set input impedance Set function (voltage DC/AC
Kepco	BOP series (via GPIB) (BOP 100W, BOP 200W, BOP 400W)	Power supply
Name of module in thaTEC:Core: Kepco_GPIB Remarks: Only for power supplies with GPIB connection! The current version of this module allows for the control of the following functions: Set output current Switch output on/off Set maximum/minimum current (to protect your equipment) Set current ramping step and time per step (to prevent too fast current changes) Set voltage protection level
Kepco	BOP series (via analog voltage from Newport XPS controller)	Power supply
Name of module in thaTEC:Core: Kepco_via_XPS
Keysight	33621A waveform generator	Pulse generator
Name of module in thaTEC:Core: Keysight_33621A
Keysight	81130 Pulse generator	Pulse generator
Name of module in thaTEC:Core: Keysight_81130A_PulseGen The current version of this module allows for the control of the following functions: Set frequency/period Set pulse width/delay per channel Set high/low voltage per channel
Keysight	DSO-X	Oscilloscope
Name of module in thaTEC:Core: Agilent_DSO-X_Oscilloscope The current version of this module allows for the control of the following functions: Activate channels Read out traces from activated channels Continuous readout
Keysight	E82XX-series RF source (E8241A, E8244A, E8251A, E8254A, E8247C, E8257C, E8267C, E8257D, E8267D)	RF source
Name of module in thaTEC:Core: Agilent_E8257D The current version of this module allows for the control of the following functions: Set RF frequency Set output power Switch RF output on/off Enable pulse modulation Set pulse width/delay/period/rate Dynamically set frequency via remote parameter
Keysight	N51XX-series RF source (N5181A, N5182A, N5183A, N5161A, N5162A, N5171B, N5172B, N5181B, N5182B, N5173B, N5183B)	RF source
Name of module in thaTEC:Core: Agilent_E8257D The current version of this module allows for the control of the following functions: Set RF frequency Set output power Switch RF output on/off Enable pulse modulation Set pulse width/delay/period/rate Dynamically set frequency via remote parameter
Keysight	N52XX series VNA (N5225A, N5221B, N5222B, N5224B, N5225B, N5227B, N5231B, N5232B, N5234B, N5235B, N5239B, N5230C, N5241B, N5242B, N5244B, N5245B, N5247B, N5249B)	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Keysight_N52xx_VNA The current version of this module allows for the control of the following functions: Read all S-Parameters (real and imaginary) Set center frequency by equation and device parameter from another device (e.g. Hall-probe) Set start/stop frequency Set number of points Set averages Set output power Switch output on/off Activate traces Take reference Display raw/corrected data (using reference data) Continuous readout Unleveled indicator
Keysight	N6700 series (N6776A)	Power supply
Name of module in thaTEC:Core: Agilent_N6776A The current version of this module allows for the control of the following functions: Set current Switch output Set software limits Set voltage protection level Current ramping: set stepsize and timing
Keysight	N9010A spectrum analyzer	Signal analyzer
Name of module in thaTEC:Core: Keysight_N9010A The current version of this module allows for the control of the following functions: Set center frequency Set frequency span Set measurement type Display traces Set trace type/trace name/detector type Set average mode and number Set number of sweep points Set input impedance Set amplitude units Set bandwidth Set attenuation and reference level
Kikusui	PBZ series	Power supply
Name of module in thaTEC:Core: Kikusui_PBZ-Series_PowerSupply The current version of this module allows for the control of the following functions: Read/set output current Switch output on/off Set software limits Set ramping parameters to prevent too fast current changes
Kymera	193i	Detector
Name of module in thaTEC:Core: Kymera_193i
LakeShore	648	Gaussmeter
Name of module in thaTEC:Core: LakeShore_648
LakeShore	LS455	Gaussmeter
Name of module in thaTEC:Core: LakeShore_455 The current version of this module allows for the control of the following functions: Read out field value Set field units Set field range Set number of samples Set offset/multiplier Automatic readout Display field value vs. time
LakeShore	LS475	Gaussmeter
Name of module in thaTEC:Core: LakeShore_475
LakeShore	LS475 including field control for magnet power supply	Gaussmeter
Name of module in thaTEC:Core: LakeShore_475_field_control Remarks: This version includes the field control of an electromagnet via the GPIO connections of the LakeShore 475 module The current version of this module allows for the control of the following functions: Read field value Read temperature Continuous readout Set target field Set field shift
MadCityLabs	Piezo controller	Positioning system
Name of module in thaTEC:Core: MadCityLabs The current version of this module allows for the control of the following functions: Up to 3 axes Read current positions Set velocity Read current action status Move to absolute position Move relative using arrow keys on keyboard
Marzhauser	Tango series	Positioning system
Name of module in thaTEC:Core: Marzhauser_Tango The current version of this module allows for the control of the following functions: Up to 3 axes Enable/disable single axis Home axes Read current position Move absolute Set current position as zero Move relative to zero position (e.g. for identical 2D scans at multiple positions on the sample) Enable/disable waiting for stage to reach target position (e.g. for very fast automated measurements) Calibrate stage
Measurement computing	USB-3100 series (3100, 3101)	DAQ hardware
Name of module in thaTEC:Core: MeasurementComputing_USB-3101
Measurement computing	USB-3101	DAQ hardware
Name of module in thaTEC:Core: MC3101-DoubleChannel The current version of this module allows for the control of the following functions: Select two output channels Set output voltage for each output channel
National Instruments	NI-9264 DAQ hardware	DAQ hardware
Name of module in thaTEC:Core: NI-DAQ-9264-AO The current version of this module allows for the control of the following functions: Set analog output voltage at 16 channels Activate channels in groups of 4 channels
National Instruments	NI9402 module for photon counter	DAQ hardware
Name of module in thaTEC:Core: NI_9402_PhotonCounter
National Instruments	USB-621X USB DAQ modules	DAQ hardware
Name of module in thaTEC:Core: NI-DAQ-USB-621X The current version of this module allows for the control of the following functions: Read analog voltages at 16 channles Activate channels in groups of 4 channels Set analog output for 2 channels
Newport	DL-series delay line	Delay line
Name of module in thaTEC:Core: Newport_DL-series_Delay-line The current version of this module allows for the control of the following functions: Move to absolute position Set reference position Move relative to reference position Insert number of reflections to enter target delay in ps instead of microns
Newport	ESP301 series	Positioning system
Name of module in thaTEC:Core: Newport_ESP301 The current version of this module allows for the control of the following functions: Move to absolute position Set axis velocity Readout current position
Newport	SMC100 DC or stepper motor controller	Positioning system
Name of module in thaTEC:Core: SMC100_Rotator The current version of this module allows for the control of the following functions: Rotate to absolute angle Relative rotation Readout current angle Home stage
Newport	XPS-series controller (XPS-D, XPS-Q)	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Ocean Optics	QE Pro	Spectrometer
Name of module in thaTEC:Core: OceanOptics_QEPro The current version of this module allows for the control of the following functions: Set integration time Set averages Read and display spectrum Display device info (serial number)
PCO	camera	Camera
Name of module in thaTEC:Core: PCO_camera The current version of this module allows for the control of the following functions: Read camera image Set exposure time Set temperature setpoint Read current temperature
Physikinstrumente (PI)	E710 piezo controller	Positioning system
Name of module in thaTEC:Core: PI_E710 The current version of this module allows for the control of the following functions: Move to absolute position Readout travel ranges
Picotech	PicoSource	Pulse generator
Name of module in thaTEC:Core: PicoSource
Picotech	PicoVNA	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: PicoVNA
Picotech	Picoscope 9300 series USB oscilloscope	Oscilloscope
Name of module in thaTEC:Core: PicoScope9300
RedLab	1608G	DAQ hardware
Name of module in thaTEC:Core: RedLab-1608G The current version of this module allows for the control of the following functions: Read and display input voltage of a single channel in a graph Set output of 2 digital out channels Double shutter mode for output channels
Rohde & Schwarz	SMB100A	RF source
Name of module in thaTEC:Core: Rohde-Schwarz-SMB100A The current version of this module allows for the control of the following functions: Set RF frequency Set RF power Switch output on/off Set maximum RF power (to protect your device) Sweep frequency using arrow keys (to find working point) Pulse modulation
SmarAct	MCS 1 positioning system	Positioning system
Name of module in thaTEC:Core: SmarAct_MCS1 The current version of this module allows for the control of the following functions: Assign axes to channels Read out axis status and current position Set soft position limits Set speed Move absolute or relative (step motion) Home stage
SpinCore	PulseBlaster USB version	Pulse generator
Name of module in thaTEC:Core: SpinCore_PulseBlaster
Stanford Research Systems (SRS)	DG645 delay generator	Pulse generator
Name of module in thaTEC:Core: SR_DG645 The current version of this module allows for the control of the following functions: Enable/Disable AB output Set delay time Set pulse duration Set level Set level offset Set polarity Set trigger source Set trigger rate Set trigger level Enable/disable burst mode Set burst configuration (burst count/burst period/burst delay)
Stanford Research Systems (SRS)	SR830	Lock-in amplifier
Name of module in thaTEC:Core: SR_830
Stanford Research Systems (SRS)	SR86x-series lock-in,SR860,SR865	Lock-in amplifier
Name of module in thaTEC:Core: SR86x_Lock-in The current version of this module allows for the control of the following functions: Set signal input type Set sensitivity/current input gain/shields/coupling/range/mode Set sine out level mode/offset/amplitude Set time constant/filter slope/internal reference frequency/harmonic/phase/auto phase Read X/Y/R/Theta values and display them simultaneously in individual graphs
Suruga	DS102 setpper motor controller	Positioning system
Name of module in thaTEC:Core: Suruga_DS102 The current version of this module allows for the control of the following functions: Device settings: Resolution and driver devision Read out current position Home stage Set software travel limits Read out hardware travel limits Go to position
Swabian Instruments	DLnsec pulsed lasers	Laser
Name of module in thaTEC:Core: Swabian_Instruments_DLnsec_Lasers
Swabian Instruments	Pulse Streamer	Pulse generator
Name of module in thaTEC:Core: PulseStreamer
Swabian Instruments	Time Tagger (TR-BLS)	Timeresolution
Name of module in thaTEC:Core: TimeTagger_2.6.6 Remarks: For Time Tagger with firmware version 2.6.2 and newer. Requires thaTEC:TFPDAS for time-resolved Brillouin light scattering measurements.
Swabian Instruments	Time Tagger module for countrates	Timeresolution
Name of module in thaTEC:Core: TimeTagger_counter Remarks: Only for Time Tagger with firmware 2.4.X
TableStable	Tandem Fabry-Perot interferometer (TFP-1, TFP-2)	Signal analyzer
Name of module in thaTEC:Core: TFPDAS
Tektronix	2000	Multimeter
Name of module in thaTEC:Core: Keithley_2000
Tektronix	2182A Nanovoltmeter	Multimeter
Name of module in thaTEC:Core: Keithley_2182A
Tektronix	2200xx-series multi channel lab power supplies,2231A-30-3	Power supply
Name of module in thaTEC:Core: Keithley_22XX-series_power-supply The current version of this module allows for the control of the following functions: Set output value and switch output of all channels individually
Tektronix	22xx series (2220, 2230, 2231)	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Tektronix	2400 series	Sourcemeter
Name of module in thaTEC:Core: Keithley_2400
Tektronix	2614B	Sourcemeter
Name of module in thaTEC:Core: Keithley_2614B The current version of this module allows for the control of the following functions: Enable/disable outputs Switch mode for each output Set current/voltage for each output Set current range/voltage limmit for each channel Set maximum/minimum current for each channel Read resistance for each output Plot resistance over time Export time-resistance plots
Tektronix	6200 series (6221)	Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Tektronix	AFG3000C-series	Pulse generator
Name of module in thaTEC:Core: Tektronix_AFG3000C_series_FunctionGen The current version of this module allows for the control of the following functions: Individual control of both channels Select waveform Set frequency Set Amplitude/Offset Set Phase Switch output on/off
Tektronix	DMM 6500	Multimeter
Name of module in thaTEC:Core: Keithley_DMM_6500_multimeter Remarks: current The current version of this module allows for the control of the following functions: Read and display voltage/current Plot values over time Set auto or manual range Set input impedance Set function (voltage DC/AC
Teledyne LeCroy	HDO-series	Oscilloscope
Name of module in thaTEC:Core: TeledyneLeCroy-HDOseries_Oscilloscope The current version of this module allows for the control of the following functions: Read out all 4 channels Read out 4 function channels Set Functions (Envelope/Floor/Roof) for each channel Set averaging Trigger Auto setup
Thorlabs	Camera	Camera
Name of module in thaTEC:Core: ThorlabsCam The current version of this module allows for the control of the following functions: Display camera image
Thorlabs	Elliptec Piezoelectric motors	Positioning system
Name of module in thaTEC:Core: Thorlabs_Elliptec The current version of this module allows for the control of the following functions: Module currently supports 2 sliders and 1 rotator simultaneously Set position of each slider Set angle for rotator Jog rotator with adjustable stepsize
Thorlabs	K-Cube Solenoid controller (KSC101)	Positioning system
Name of module in thaTEC:Core: Thorlabs_KSC101
Thorlabs	K-cube brushed DC servo motors (KDC101)	Positioning system
Name of module in thaTEC:Core: Thorlabs_KDC101
Thorlabs	K10CR1	Rotation stage
Name of module in thaTEC:Core: Thorlabs_K10CR1_Rotation_mount The current version of this module allows for the control of the following functions: Set target position in degree Read position in degree
Thorlabs	Kinesis software module	Positioning system
Name of module in thaTEC:Core: Thorlabs_Kinesis Remarks: Available functions depend on the connected device.
Thorlabs	PM-series powermeter (PM100A, PM100D, PM100USB, PM101 Series, PM102 Series, PM103 Series, PM16 Series, PM160, PM160T, PM160T-HP, PM200, PM400)	Powermeter
Name of module in thaTEC:Core: Thorlabs_PM-series_Powermeter The current version of this module allows for the control of the following functions: Set wavelength Read current power Plot power over time
Thorlabs	Thorlabs MDT69XB stage controller	Positioning system
Name of module in thaTEC:Core: Thorlabs_MDT69XB The current version of this module allows for the control of the following functions: Set x y z position Adjust velocities
Toptica	iBeam smart series	Laser
Name of module in thaTEC:Core: Toptica_iBeam_smart The current version of this module allows for the control of the following functions: Set laser power Switch laser on/off Read laser power Read drive current Read laser status (power on laser on channel 1 on)
Velmex	VXM series	Positioning system
Name of module in thaTEC:Core: GMW_Velmex_MotionControl The current version of this module allows for the control of the following functions: Read and set absolute position of all 4 axes Indicator if stage is homed Relative movement relative to defined position

Your device is missing?
>> Send us a request for your device! <<